Removing water from your paddle board
Paddle boarding is a great summer activity, but if you don’t remove the water that gets inside your paddle board, it will be much harder to paddle. That’s why you need to remove the water that is inside the paddle board as soon as possible. In this article, we will show you how to do it in the easiest way possible!
1. Find the source of the water
First of all, you need to find the source of the water. If the water is coming from the outside, then you need to fix the hole or crack that is letting the water in. If the water is coming from inside the paddle board, then it is probably because you have left it in the sun for too long and the heat has caused the water to expand and break through the paddle board. Either way, you need to find and fix the source of the water before you can remove the water from inside the paddle board.
2. Remove the water from your paddle board
Once you have found and fixed the source of the water, you can start removing the water from inside the paddle board. The best way to do this is to use a sponge or a cloth to soak up the water and then wring it out into a bucket. You can also use a pump to remove the water, but this will take longer and you will need to be careful not to damage the paddle board.
3. Dry your paddle board
Once you have removed all of the water from inside the paddle board, you need to dry it out as much as possible. The best way to do this is to put it in the sun for a few hours. If you can’t put it in the sun, then you can use a hairdryer on a low setting to dry it out.
Once the paddle board is dry, you can start using it again. Just make sure that you keep an eye on the source of the water and fix it as soon as possible to prevent any further damage!